1. When we use the air purifier, the fan is set at the air inlet, the wind speed is uniform, the air inlet is uniform, and the fan has some temperature rise, so most of the heat can be reduced. However, in the drainage of condensate, the technical requirements for water storage are relatively high, which bears the pressure of the project section.
2. The design of the dust-free workshop standardizes the relevant process of the air purifier, which is installed in the positive pressure air conditioning system. Most of the air-conditioning boxes are cut off by function. There will be rust when the fan section is used for a long time, so we should also pay attention to the maintenance and protection of the equipment. Protection work shall also be done for relevant construction equipment.
Whether the ventilation filter can achieve the desired effect, let's analyze the filtering effect in each filter section and how to install the process method.
1. The central air conditioning unit used in ventilation meets the following rules when verifying the time demand of the project: the air flow in the unit shall be uniform and uniform. It contains filters, heat exchangers, silencers, etc., which play their roles. The uniform pressure balance on the cross section of the unit is conducive to the stability of the wind speed.
2. The higher the level of the filter, the closer it is to the air supply end of the clean system. Generally, there are air conditioning heaters and humidifiers, so fire safety measures should be taken.
3. Testing the air parameters is not conducive to the corrosion of the fan section when it is closed. It can reduce the scale of corrosion and transport the motor. Pay attention to the oxidation of metal.
This article comes from: air purification project more content please click: we will provide a satisfactory service for your questions, welcome your call!