9159金沙游戏场-9159金沙游戏艺场官网

  • 地址:济南市槐荫区鑫苑世家公馆2号楼2603室
  • 电话:0531-87568508 /
  • 手机:18653128690
  • 邮箱:jnyhrs@163.com
  • 实验室高效送风口安装要care什么?
    来源: 浏览:次 发布日期:2018-08-23
    高效送风口的安装care事项:
    Matters needing attention in installation of high efficiency air supply outlets:
    1.在安装高效送风口上需要先清洗好产品,并且要对洁净室进行全方位的清洁,如果净化空调系统中有灰尘,要进行清扫清除,需要达到清洁要旨的准则才能清洁夹层或者吊顶内部,再次净化空调系统下必需要试运转连续12h如该,才能做再一次的清洁处理。
    1. Clean the product before installing the high-efficiency air supply outlet, and clean the clean room in an all-round way. If there is dust in the air-conditioning system, it needs to be cleaned and cleaned. It needs to reach the standard of cleaning requirements to clean the interlayer or ceiling interior. After the air-conditioning system is cleaned again, it must run for more than 12 hours continuously. In order to do the cleaning again.
    2.安装上众家起首要知晓的一点是,高效送风口的尺寸效率要旨,必需要符合洁净室现场的策划要旨及衣食父母的准则。
    2. The first thing we should know before installation is that the dimension and efficiency requirements of high-efficiency air supply outlet must meet the design requirements of clean room site and customer standards.
    3.高效送风口在安装之上,需要现场对送风口的包装进行检查,检查始末包括滤纸、密封胶以及框架,看这些东西有无损坏的环境;边长、对角线和厚度尺寸是否符合吾们的要旨;框架上有无毛刺和锈斑;产品是否有合格证, 技术实现 性能是否符合策划的要旨。
    3. Before the installation of the high-efficiency air supply outlet, it is necessary to inspect the packaging of the air supply outlet on the spot, including filter paper, sealant and frame to see if there is any damage to these things; whether the side length, diagonal line and thickness meet our requirements; whether there are burrs and rust spots on the frame; whether the product is qualified, Technology Does the performance meet the design requirements?

    空气净化工程
    4.高效送风口的安全运输需要严格按照生厂家的标志说明来放置,在运输的过程中需要轻拿轻放切忌不要剧烈振动和碰撞。
    4. Safe transportation of high-efficiency air supply outlet should be placed strictly according to the manufacturer's 品牌刺绣. In the process of transportation, it should be handled lightly and avoid violent vibration and collision.
    5.进行高效送风口检漏,检查和检漏产品是否合格,安装时要按照各台送风口阻力的大小进行合理的调配,对于单向流的送风口,同一风口或者送风面上的滤器之间,每台额定的阻力和各台平均阻力相差要小于5百分比。洁净度的级别要等于或高于100级洁净室的高效送风口。
    5. Check the leakage of high-efficiency air supply outlet, check and check whether the product is qualified, install according to the size of the resistance of each air supply outlet reasonable allocation, for unidirectional flow air supply outlet, between the same air outlet or the filter on the air supply surface, each rated resistance and the average resistance difference between each set should be less than 5百分比. The cleanliness level should be equal to or higher than that of the 100 level clean room.
    7.洁净房间内部需要安装高效送风口的风口翻边和吊顶板之间的接缝要施行密封垫处理,有裂缝的区域必需要严格的处理好。如果高效送风口损坏或涂层破损不得再进行安装,送风口和风管在安装时必需要严格的连接好,开口端用的是塑料薄膜和胶带加固密风处理。
    7. Clean room needs to install high-efficiency air supply vent flanging and ceiling joints between the implementation of gasket treatment, cracks in the place must be strictly handled. If the high-efficiency air supply outlet damage or coating damage can not be installed again, the air supply outlet and air duct in installation must be strictly connected, the opening end is reinforced with plastic film and tape dense air treatment.
    有了空气净化工程上面的小总结,瞩望对广大衣食父母兼有扶掖,如果有什么不理解的或者寻求扶掖的请点击吾们的官方网站:或者来电咨询,吾们会尽全力为您解决
    With the summary of the air purification project above, I hope it will be helpful to our customers. If you have any incomprehension or ask for help, please click on our official website: or call for advice. We will try our best to solve it for you.
    XML 地图 | Sitemap 地图