When it comes to asepsis room decoration, schools, chemical plants, research institutes and other enterprises and institutions will conduct laboratory testing and storage of instruments used. Then, asepsis room care needs to pay attention to what?
First of all, the bench bottom cabinet are arranged in accordance with the drawings, all of the same table in the cabinet bottom cabinet installation position along the profile at the same level, the level of adjustment after the requirements of the experimental station cabinet and the cabinet at the end of the bottom gap distance is less than 3mm, the joint error does not exceed 2mm. If you need the bottom cabinet all together, must be connected in the end level, when the connection between the joint requirements must be uniform and compact seam distance is less than 2mm, under the joint error size can not exceed 3mm.
Secondly, the experimental platform should be as good as possible to maintain its integrity, should also minimize the joint, and can not be connected longitudinally. Check the table panel on the outside of the lower edge is only the ditch, check the water, electricity and gas and air pipe and position of the interface, check whether there is a deviation between the design, timely communication, to determine the final solution.
Finally, the use of asepsis room decoration and water, electricity, gas, chemicals and materials, as well as instruments and equipment in contact with the furniture structure and material design standards also put forward higher requirements.
吾们将用先进的 技术实现 ，真诚的态度,为您供给为全面的效劳。吾们将会陆续向众家奉献，敬请期待。
This article from the asepsis room decoration, friendship dedication, more relevant knowledge, please click: /
, we will use the most advanced technology, the most sincere attitude, to provide you with the most comprehensive services. We will continue to dedicate to you, please look forward to.