The design, research and development and construction process of the cleaning project need numerous planning and calculation to solve the problems in the clean workshop construction with correct solutions. Rigorous and meticulous, must be done by every purification engineering company. In order to make the whole project in normal operation use, to achieve the desired purification effect, strict daily management requirements are indispensable, the following air purification engineering manufacturers Xiaobian for everyone to introduce.
1. A buffer zone is a special area in a clean shop with a distinct marking and remains closed. In order to ensure the cleanliness of the room, the entrance shall not be opened simultaneously, and a chain device shall be provided.
2, purification project temperature and humidity should be well controlled, relative temperature and humidity should be guaranteed within the specified range, noise, lighting and other related parameters should be so.
3 、 purification engineering air conditioning system should be maintained in continuous operation until the cleaning and maintenance work is completed.
4、洁净区与相邻洁净区的静压差应符合准则要旨，即I、II 级> 8pa;III、IV级> 5 pa;洁净区对非洁净区>10 pa;
4. The static pressure difference between the clean area and the adjacent clean area should meet the standard requirements, that is, I, II class > 8PA, III, IV class > 5 Pa; clean area for non clean area >10, pa;
5, clean workshop must be in the state of positive pressure, to ensure indoor cleanliness.
Our company's product quality is trustworthy, and we will be your most trusted friend, your satisfaction is our unremitting pursuit, let us work together for tomorrow's good and work hard.